PDA006A Characteristics
WWW.PHIHONG.COM
INPUT:
EMC
AC Input Voltage
90 to 132VAC
FCC Part 15 Class B
Immunity
Nominal AC Input Voltage
110 to 120VAC
EN61000-4-2
EN61000-4-4
EN61000-4-5
EN61000-4-11
Leakage Current
<0.25mA at 110VAC and maximum load
Isolation Test
Maximum Input Current
Primary to Secondary: 3000VAC, <10mA, 1 minute
≤250mA at full load, 120VAC
Insulation Resistance
No-Load Power Draw
<300mW at 115VAC, 60Hz
Primary to Secondary: 500VDC, >5M ohm, 1
minute
OUTPUT:
FEATURES:
Total Output Power
6W maximum
Input Current Protection
The input power line will be fused with a
1W/10Ohm fuse resistor
Efficiency
≥73% at nominal input voltage, full load
Meets requirements for Level V efficiency marking
Short Circuit
Auto restart without damage
Power Factor
≥0.9 at nominal input voltage, full load
Output Over-Voltage Protection
Output should not exceed voltage limit, auto shut
down
ENVIRONMENTAL:
Operating Temperature
Storage Temperature
0 to +40°C
-40 to +85°C
AC Input
Fixed Blade (North America)
Operating Humidity
10 to 95%
DC Output
2.1mm x 5.5mm x 9.5mm center positive barrel
Ingression Protection
IP20; plastic housing
Lifespan
20K Hours minimum at max load
Dimension Diagram Unit:mm