PE42540
Product Specification
Figure 25. Tape and Reel Drawing
Tape Feed Direction
Ao = 5.25 ± 0.05 mm
Bo = 5.25 ± 0.05 mm
Ko = 1.1 ± 0.05 mm
Notes: 1. 10 sprocket hole pitch cumulative tolerance ±0.02
2. Camber not to exceed 1 mm in 100 mm
3. Material: PS + C
4. Ao and Bo measured as indicated
5. Ko measured from a plane on the inside bottom of
the pocket to the top surface of the carrier
6. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole
Table 7. Ordering Information
Order Code
PE42540LGBC-Z
EK42540-03
Description
Package
Shipping Method
PE42540 SP4T RF switch
PE42540 Evaluation kit
Green 32-lead 5x5 mm LGA
Evaluation kit
3000 units / T&R
1 / Box
Sales Contact and Information
For Sales and contact information please visit www.psemi.com.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third
party.
Advance Information: The product is in a formative or design stage. The datasheet contains
design target specifications for product development. Specifications and features may change in
any manner without notice. Preliminary Specification: The datasheet contains preliminary data.
Additional data may be added at a later date. Peregrine reserves the right to change specifications
at any time without notice in order to supply the best possible product. Product Specification:
The datasheet contains final data. In the event Peregrine decides to change the specifications,
Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification
Form).
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical
implant, or in other applications intended to support or sustain life, or in any application in which the
failure of the Peregrine product could create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of
the use of its products in such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and
DuNE are trademarks of Peregrine Semiconductor Corp.
The information in this datasheet is believed to be reliable. However, Peregrine assumes no
liability for the use of this information. Use shall be entirely at the user’s own risk.
©2010-2012 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0299-08
|
UltraCMOS® RFIC Solutions
Page 12 of 12