Package / Pinning / Derating
PIN CONNECTIONS
# SINGLE DUAL
1 - Vin
2 +Vin
3 Ctrl.
- Vin
+Vin
Ctrl.
6 +Vout
7 N.C.
8 N.C.
9 - Vout
+Vout
Common
N.C.
- Vout
App Notes:
1 = Measured Input reflected ripple current with a simulated source inductance of 12uH
2 = Tested by nominal Vin and constant resistive load.
3 = Test by normal Vin and 100%-25% load,25% Ioad step change; If Vout is 3.3V then the Transient Response Deviation is ±5%.
4 = Input filter components are required to help meet conducted emission class A
5 = An external filter capacitor is required to meet EN61000-4-4 and EN61000-4-5. (e.g. Nippon-chemi-con KY series, 220uF/100V)
EMC SPECIFICATIONS
Remote ON/OFF
Conducted
EN 55022
CLASS A
Emissions4
Radiated
Emissions
ESD
The MCU Pin Voltage is referenced to –Vin (Pin1)
ON: 0 – 0.6 VDC or open circuit
OFF: 2.7 - 15 VDC
EN 55022
CLASS A
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria B
Perf. Criteria A
Perf. Criteria A
OFF stand by input current: 5mA, max.
RS
EFT5
Surge5
CS
PFMF
PMBW-Series – P10RG-xxxxE/Z4:1LF – Single / Dual Output – SIP9 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/4