Package / Pinning / Derating
PIN CONNECTIONS
SINGLE DUAL SINGLE "C" DUAL "C"
#
1 - Vin
2 +Vin
- Vin
+Vin
- Vin
+Vin
Ctrl.
- Vin
+Vin
3 Omitted N.C.
5 Omitted N.C.
Ctrl.
N.C.
N.C.
+Vout
- Vout
6 +Vout
7 - Vout
8 N.C.
+Vout
- Vout
+Vout
- Vout
Common
Common N.C.
(Same pinning for 3kv I/O isolation)
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH
² = Tested by nominal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
MCU (Master Control Unit)
The MCU Pin Voltage is referenced to –Vin (Pin1)
ON: 0 – 0.8 VDC / open / short circuit Pin1 and Pin3
OFF: 5 VDC
OFF idle current: 5mA, typ.
PMB-Series – P(C)10NG-xxxxE/Z2:1(H30)LF – Single / Dual Output – SIP8 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 4/4