Package / Pinning / Derating
0.50
(0.02)
1
2
3
4
All dimensions are typical in millimeters (inches).
- Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002)
- Pin pitch tolerance: +/-0.35 (+/-0.014)
- Case tolerance +/-0.5 (+/-0.02)
Bottom View
0.50
(0.02)
Specification may change without notice.
11.68
(0.46)
7.50
(0.29)
PEAK
Modelcode
Datecode
1
2
3
4
2.54
(0.10)
0.50
(0.02)
SIP4 – PLASTIC CASE
PIN CONNECTIONS
#
1
2
3
4
SINGLE
- Vin
+Vin
- Vout
+Vout
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH.
² = Tested by minimal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
- For reduce converter’s ripple & noise, it is recommended to add a 4.7µF~220µF capacitor in output end. For EMI performance
improvement, it is recommended to add a 12µH inductor and a 10µF~100µF capacitor in input end.
EMC SPECIFICATIONS
Radiated
Emissions
ESD
EN 55022
FCC 47CFR Part 15/B
IEC 61000-4-2
CLASS B
CLASS B
Perf. Criteria B
Perf. Criteria A
RS
IEC 61000-4-3
PME-Series – P10IU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/3
PEAK [ PEAK ELECTRONICS GMBH ]
