Package / Pinning / Derating
2.1
(0.9)
All dimensions are typical in millimeters (inches).
- Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002)
- Pin pitch tolerance: +/-0.35 (+/-0.014)
- Case tolerance +/-0.5 (+/-0.02)
Specification may change without notice.
0.50
0.50
(0.02)
(0.02)
6.00*
(0.24)
19.50
(0.76)
* The thickness
of 48Vin voltage
is 7.20(0.28)
PEAK
Modelcode
Datecode
6
1
2
4
5
7
2.54
(0.10)
SIP 7 – PLASTIC CASE
15.24
(0.60)
PIN CONNECTIONS
SINGLE DUAL
+Vin
#
1 +Vin
2 - Vin
4 - Vout
- Vin
- Vout
5 Omitted Common
6 +Vout +Vout
7 Omitted Omitted
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH.
² = Tested by minimal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
- For reduce converter’s ripple & noise, it is recommended to add a 4.7µF~220µF( 4.7µF~ 100µF for dual output) capacitor in
output end. For EMI performance improvement, it is recommended to add a 12µH inductor and a 10µF~100µF capacitor in input
end.
PM3-Series – P10CU-xxxxE/Z LF – Single and Dual Output – SIP7 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 4/4
PEAK [ PEAK ELECTRONICS GMBH ]
