LED T-8 LIGHT TUBE
T8F20W-WWE0-FW
Rev. : A /0
uInstallation:
n LED T-8 tube connection diagram
nRetrofit Installation Procedures (Preformed by Professional Electrician only):
uTurn off the power. Remove the starter. Reconnect AC line wires directly to the light
socket. One line on each side.
If electronic ballast is used, disconnect AC line wires from the electronic ballast.
Reconnect AC line wires directly to the light socket. One line on each side.
uRecommend height: 3~3.5 meters from the ground.
Remove the starter
starter
Turn off the power. Remove the starter or
the electronic ballast. Reconnect the AC line
wires to the light tube sockets. One line on
each side
uPackaging Method:
Inside carton size: 29*29*1220mm
Outside carton size:180*180*1235mm
1box:5level*5pcs=25pcs
DRAWING NO. : DS-80-12-XXXX
DATE : 2012-8-30
Page : 4
PARALIGHT [ PARA LIGHT ELECTRONICS CO., LTD. ]
