A-564SR-AB/W 参数 Datasheet PDF下载

0.56 INCH FOUR DIGITS DISPLAY

A-564SR-A B/W

SOLDERING

METHOD

SOLDERING CONDITIONS

REMARK

Solder no closer than 2mm from

the base of the package

Using soldering flux,” RESIN FLUX”

is recommended.

REV:A / 0

DIP

SOLDERING

Bath temperature: 260 max

Immersion time: with 5 sec

During soldering, take care not to

Soldering iron: 30W or smaller

press the tip of iron against the

SOLDERING

Temperature at tip of iron: 360

℃

or lower PIN.

IRON

Soldering time: within 3 sec.

(To prevent heat from being

transferred directly to the PIN.)

1) When soldering the PIN of Display in a jig that the package is fixed with a panel (See fIg.1), be

careful not to stress the PIN with iron tip. When soldering Display in a condition that the package

is fixed with a panel, be careful not to cling and stress the surface of Display on the panel to avoid

damaging the Display.

Fig.1

Regarding solution in the tinning oven for product-tinning, compound sub-solution made of tin &

copper and silver is proposed with the temperature of Celsius 260. The proportion of the

alloyed solution is tin 95.5: copper 3.5: silver 0.5 by percentage. The time of tinning is constantly

3 seconds.

DRAWING NO. : DS-14-09-0100

DATE : 2009-10-23

Page : 5