SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
fluoride.
2. MELTABLE INSERTS: Low-outgassing thermoplastic, color-natural.
3. SEAMLESS STUB SPLICE: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin plated per MIL-T-10727.
CMA Range: 300 to 1510 circular mils.
APPLICATION
1. This system is designed to provide an environmentally resistant splice in wires rated for at least 125°C. Splices may be
either two wire stub splices or 1 to 1 or 2 to 1 parallel splices. If two wires exit from one end, they must have a combined
outer diameter of less than 2.03 (0.080).
2. Parts when installed as detailed on Raychem Specification Control Drawing D-436-58/-59 shall meet
performance requirements of MIL-S-81824.
3. Acceptance testing shall be in accordance with Paragraph 4.6 of MIL-S-81824.
TITLE :
Tyco Electronics Corporation
305 Constitution Drive
Raychem
STUB SPLICE SEALING
Products
Menlo Park, CA 94025, USA
SYSTEM,
TIN PLATED CRIMP
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: D-436-0128
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
26-Jan.-00
DOC 2ISSUE:
ROUGHNESS IN
MICRON
0 N/A
DRAMWN. FBYO:RONDA
REPLADCE0S0: 1280
DCR NDUM01BE0R0:47
A
SCNALoEn:e
A
1 of 1
PROD. REV.
SIZE:
SHEET:
If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]