SPECIFICATION CONTROL DRAWING
Product Revision
Product Name
Product Dimensions
L MAX
øA min
øB min
D-108-00
F
F
E
F
17.25
(0.680)
17.25
(0.680)
17.25
1.9
(0.075)
2.8
(0.110)
4.4
2.4
(0.095)
3.15
(0.125)
5.0
D-108-01
D-108-02
D-108-03
(0.680)
20.5
(0.175)
7.1
(0.200)
7.6
(0.810)
(0.280)
(0.300)
MATERIAL
1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE
FLOURIDE. TRANSPARENT BLUE.
2. SOLDER PREFORM WITH FLUX:
Solder: Sn96 Ag4 per ANSI J-STD-006.
Flux: ROL1 per ANSI J-STD-004.
3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red.
NOTES
A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may
be used on cables rated for at least 135°C minimum, having silver plated copper shields and meeting
the dimensional criteria shown in the table.
B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard
NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with
Raychem assembly procedure RCPS-100-70.
TEMPERATURE RATING: -55°C to +175°C.
TITLE:
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
THERMOFIT
DEVICES
Raychem
SOLDERSLEEVE
SHIELD TERMINATOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO. : D-108-00/-01/-02/-03
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
REPLACES:
D980867
D961392
ROUGHNESS IN
MICRON
0 N/A
DRAWN BY:
DATE:
PROD. REV.
SEE TABLE
DOC ISSUE:
3
SCALE:
None
SIZE:
A
SHEET:
1 of 1
M. FORONDA
04/09/98
If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]