SPECIFICATION CONTROL DRAWING
I.D.*
a min
b max
Crimp Splicer
C
Product
Name
Prod.
Rev:
E
max
Color
Code
øA
øB
D
2.16 (0.085)
0.64 (0.025)
2.79 (0.110)
0.64 (0.025)
4.32 (0.170)
0.64 (0.025)
1.27 (0.050)
1.14 (0.045)
1.75 (0.069)
1.63 (0.064)
2.60 (0.102)
2.46 (0.097)
2.03 (0.080)
1.91 (0.075)
2.70 (0.106)
2.57 (0.101)
3.89 (0.153)
3.73 (0.147)
12.95 (0.510)
12.45 (0.490)
14.86 (0.585)
14.35 (0.565)
14.86 (0.585)
14.35 (0.565)
6.22 (0.245)
5.72 (0.225)
7.11 (0.280)
6.60 (0.260)
7.11 (0.280)
6.60 (0.260)
0.38
(0.015)
0.51
(0.020)
1.27
D-200-82
D-200-83
D-200-84
A
A
A
Red
Blue
Yellow
(0.050)
* I.D: a- As received; b- After unrestricted recovery thru meltable insert.
Product
Name
D-200-82
D-200-83
D-200-84
MIL Spec
Equivalent Size
M81824/1-1
M81824/1-2
M81824/1-3
Wire
Range
26-20
20-16
16-12
Wgt. Lbs/Mpc
max
1.02
1.61
2.72
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer.
2. MELTABLE RINGS: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue.
3. CRIMP SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B75.
Plating: Nickel per SAE AMS-QQ-N-290.
Color Code: See table.
TITLE:
Tyco Electronics Corporation
IN-LINE SPLICE SEALING SYSTEM, 1 TO 1
NICKEL PLATED CRIMP, 200deg.C
DOCUMENT NO.:
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
D-200-82/-83/-84
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
DOC. ISSUE:
DATE:
ROUGHNESS IN
MICRON
SEE TABLE
1
07-Nov-05
0 N/A
PREPARED BY:
mforonda
DCR NUMBER:
D050442
REPLACES:
---
CAGE CODE :
06090
SCALE:
---
SIZE:
A
SHEET:
1 of 2
© 2005 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.