CUSTOMER DRAWING
L1
1.50
[0.06)
31.5
[1.24]
31.5
[1.24]
31.5
[1.24]
37.5
[1.48]
øA*
Size Range
mm2
(AWG)
Wire Strip
Length
Nom.
Product
Name
L2
min
øB
min
Color
Marking
(a)
min
3.00
(b)
max
1.40
0.15 – 0.25
(26 - 24)
0.5 - 1.0
(22 - 18)
1.5 - 2.5
(16 - 14)
3.0 - 6.0
(12 - 10)
5.0
[0.20]
5.0
[0.20]
5.0
[0.20]
10.0
[0.39]
1.09
6 to 8
®
D-406-0034
D-406-0001
D-406-0002
D-406-0003
Yellow
Red
DURASEAL 24-26
[0.118]
[0.055]
1.40
[0.043] (1/4 to 5/16)
3.70
1.47
[0.058]
2.33
[0.092]
3.50
6 to 10
(1/4 to 3/8)
6 to 10
(1/4 to 3/8)
10 to 13
®
DURASEAL 18-22
[0.146]
4.60
[0.055]
2.00
®
Blue
DURASEAL 14-16
[0.181]
[0.080]
2.80
6.50
®
Yellow
DURASEAL 10-12
[0.255]
[0.110]
[0.138]
(3/8 to 1/2)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked polyamide (Nylon) with a polyamide-based hot-melt
adhesive liner. See above table for applicable sleeve color.
2. CRIMP SPLICE: Tin-plated copper alloy.
BASE METAL: Copper alloy C11000 per ASTM B152.
PLATING: Tin-plated per ASTM B545, Class A.
APPLICATION
1. These parts may be used to obtain an environment-resistant one-to-one in-line (butt) splice in wires meeting the size range and
diameter restraints specified herein and having a temperature rating of not less than 85C.
2. * øA: (a) Minimum diameter as received: Wire insulation diameter must be less than this value.
(b) Maximum diameter after recovery: Wire insulation diameter must be larger than this value to obtain an environment
resistant splice.
3. Wires are to be stripped per table, inserted into opposite ends of the crimp barrel, crimped with a TE Connectivity AD-1522 (22-10
AWG) or equivalent. For D-406-0034, Pro-Crimper III with die set 1976356-1 (24-22 AWG) or equivalent may be used. The
sleeve must be heated along its entire length until the crimp marks are gone and the ends of the sleeve recover onto the wires.
4. Spliced assemblies will meet the requirements of TE Connectivity / Raychem specification RB-107.
5. Except for D-406-0034, all of the parts covered by this drawing are UL Listed (US and CANADA), File #E87681.
TITLE:
TE Connectivity
300 Constitution Dr
Menlo Park, CA
94025, U.S.A.
DURASEAL CRIMP SPLICE
ENVIRONMENT RESISTANT
DOCUMENT NO.:
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
D-406-00XX
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
REV:
DATE:
ROUGHNESS
IN MICRON
C1
15-APR-11
0 N/A
DRAWN BY:
CAGE CODE:
REPLACES:
ECO NUMBER:
SCALE:
SIZE:
SHEET:
EC0-11-005139
P.TALLY
06090
D060233
NTS
A
1 of 1
© 2008,2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
DuraSeal is a trademark of TE Connectivity
PANDUIT [ PANDUIT CORP. ]