SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. SINGLE-WIRE SEAL: Immersion resistant thermoplastic.
3. THREE-WIRE SEAL: Immersion resistant thermoplastic.
4. CRIMP SPLICE: Base metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
Color code: See table below.
Dimensions of Crimp Splice :
Part
Name
D-436-52
Prod.
Rev.
C
Crimp Splice
D
14.86 (0.585)
14.35 (0.565)
14.86 (0.585)
14.35 (0.565)
Size
16
ØA
ØB
E
Color Code
Blue
2.69 (0.106)
2.56 (0.101)
3.91 (0.154)
3.73 (0.147)
1.75 (0.069)
1.63 (0.064)
2.59 (0.102)
2.46 (0.097)
7.11 (0.280)
6.60 (0.260)
7.11 (0.280)
6.60 (0.260)
D-436-53
C
12
Yellow
Installation Data:
Wire Size Range of Crimp Splice
Two wires
Splicer
Size
One Wire
Three wires
Minimum
Maximum
Minimum
Maximum
Minimum
Maximum
16
12
20
16
16
12
24
22
20
16
24
22
22
18
TITLE :
TE Connectivity
Raychem
Products
305 Constitution Drive
Menlo Park, CA 94025, USA
IN-LINE SPLICE SEALING SYSTEM,
2 OR 3 TO 1 SPLICE: Tin Plated,
Color Coded, with Inspection Slots
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: D-436-52/-53
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
DOC ISSUE:
15-Apr-11
2
ROUGHNESS IN
MICRON
0 N/A
DRAWN BY:
REPLACES:
DCR NUMBER:
PROD. REV.
SCALE:
SIZE:
SHEET:
M. FORONDA
N/A
D001302
SEE TABLE
None
A
1 of 2
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]
