SPECIFICATION CONTROL DRAWING
Insulation Resistance
Vibration
Insulation Resistance
Altitude Immersion
Insulation Resistance
Voltage Drop**
5000 M @500V d-c
MIL-STD-202, Method 201
5000 M @500V d-c
75,000 ft. (1 cycle)
5000 Megaohms
Wire Equivalent + 2.0
millivolts (maximum)
Table II
MIL-W-81044, Par. 4.7.5.2
MIL-T-7928, Par. 4.8.6
MIL-W-81044, Par. 4.7.5.2
MIL-C-26500, Par. 4.7.21
MIL-W-81044, Par. 4.7.5.2
MIL-T-7928, Par. 4.8.1
Tensile Strength
MIL-T-7928, Par. 4.8.7
*
Test methods are per MIL-STD-202.
** Test current shall be equal to 3X the rated current fot the smallest gauge wire used.
2.4
Test Group C: Ten Assemblies:
Test Sequence
Requirement
Test Method
Insulation Resistance
Salt Spray (Corrosion)***
Insulation Resistance
Altitude Immersion
Insulation Resistance
Voltage Drop**
5000 M @500V d-c
MIL-W-81044, Par. 4.7.5.2
MIL-T-7928, Par. 4.8.4
MIL-W-81044, Par. 4.7.5.2
MIL-C-26500, Par. 4.7.21
MIL-W-81044, Par. 4.7.5.2
MIL-T-7928, Par. 4.8.1
5000 M @500V d-c
75,000 ft. (1 cycle)
5000 M @500V d-c
Wire Equivalent + 2.0
millivolts (maximum)
Table II
Tensile Strength
MIL-T-7928, Par. 4.8.7
*** Lead ends to be sealed prior to exposure.
2.5
Test Group D: Five Assemblies:
Test
Requirement
Test Method
Flammability
Self Extinguishing
within 15 seconds
MIL-T-7928, Par. 4.8.10
2.6
Test Group E: Three Sleeves:
Test
Requirement
Test Method
Corrosive Effect
Non-Corrosive
MIL-I-23053, Par. 4.6.10.2
2.7
Test Group F: Five Sleeves:
Test
Requirement
Test Method
Insulation Shrinkage
Sheet 1
MIL-I-23053, Par. 4.6.3.2.2
TITLE :
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
IN-LINE SPLICE SEALING
SYSTEM, MULTI-WIRE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: D-436-42/-43
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
DOC ISSUE:
15-Apr-11
2
ROUGHNESS IN
MICRON
0 N/A
DRAWN BY:
REPLACES:
DCR NUMBER:
PROD. REV.
SCALE:
SIZE:
SHEET:
M. FORONDA
N/A
D001303
SEE TABLE
None
A
3 of 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
PANDUIT [ PANDUIT CORP. ]
