DLP™ Projector
PT-RX110B/RX110W/RX110LB/RX110LW
Formula for calculating possible heights when using the ET-DLE030
If using a screen size which has not been previously mentioned, use the following calculation formulas to
obtain the possible setting-up height.
For screen aspect ratio of 4:3
Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.8-67.1
Possible setting-up height A2 (mm) = A1 + 200
For screen aspect ratio of 16:9
Possible setting-up height A1 (mm) = Projection screen size (inches) x 5.7-67.1
Possible setting-up height A2 (mm) = A1 + 200
* There may be a small margin of error in the values obtained from the above formulas.
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
• Floor mount
• Ceiling mount
(When the lens except the ET-DLE085 is mounted.)
(When the lens except the ET-DLE085 is mounted.)
0.3H
Projected image width H
0.1H
Standard projection postition
0.1H
0.1H
0.1H
Projected image width H
Standard projection postition
0.3H
• Floor mount
• Ceiling mount
(When the ET-DLE085 is mounted.)
(When the ET-DLE085 is mounted.)
Projected image width H
0.1H
0.28H
Standard projection postition
0.1H
Projected image width H
Standard projection postition
0.28H
•
The ET-DLE055 has a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.
As of August 2016
14/18
SFD16M036
PANASONIC [ PANASONIC ]
