Plastic Film Capacitors
Stacked Metallized PEN Film Chip Capacitor
Type:
ECWU(C)
Stacked metallized PEN film as dielectric with simple
mold-less construction
IFeatures
•
Small in size
•
For reflow soldering
•
RoHS directive compliant
IRecommended
Applications
•
General purpose (Coupling, By-pass)
IExplanation
of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
C
W
U
Rated voltage
Nominal capacitance
C
Cap. Tol. Suffix
J ±5 %
K ±10 %
Suffix
Product code
Dielectric
&
construction
1C 16 VDC
1H 50 VDC
1 100 VDC
2 250 VDC
Tape width
9 12 mm
V 16 mm
ISpecifications
Category temp.range
(Including temperature-rise on unit surface)
Rated voltage
16 VDC, 50 VDC : -55 ˚C to +105 ˚C
100 VDC, 250 VDC : -55 ˚C to +125 ˚C
16 VDC, 50 VDC, 100 VDC, 250 VDC
(100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/˚C more than 85 ˚C)
16 VDC
Capacitance range
50 VDC
100 VDC
250 VDC
Capacitance tolerance
16 VDC, 50 VDC
100 VDC
0.12 µF to 0.47 µF (E12)
0.056 µF to 0.22 µF (E12)
0.012 µF to 1.0 µF (E12)
0.0010 µF to 0.12 µF (E12)
±5 %(J)
>
±5 %(J), ±10 %(K) (C
=
0.18 µF : ±10 %(K)only)
Withstand voltage
Dissipation factor (tan )
±5 %(J), ±10 %(K)
250 VDC
Between terminals: Rated volt. (VDC)✕150 % 60 s
tan
<
1.0 %(20 ˚C, 1 kHz)
=
C
<
0.33 µF
=
>
16 VDC : IR
=
3000 MΩ · (20 ˚C,10 VDC, 60 s)
>
50 VDC : IR
=
3000 MΩ · (20 ˚C,50 VDC, 60 s)
>
100 VDC, 250 VDC : IR
=
3000 MΩ · (20 ˚C,100 VDC, 60 s)
>
16 VDC : IR
=
1000 MΩ · µF (20 ˚C,10 VDC, 60 s)
>
100 VDC : IR=1000 MΩ · µF (20 ˚C,100 VDC, 60 s)
Insulation resistance (IR)
C>0.33 µF
Soldering conditions
Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface)
(Please consult us for Reflow 250 ˚C max. product.)
❈
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
❈
Please consult us for capacitance range between 0.15 µF and 1.0 µF for 250 VDC type.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.