AN5392FBQ
ICs for TV
■ Terminal Equivalent Circuits (continued)
Pin No.
Equivalent circuit
Description
11
VP in:
VCC 5 V (I2L VCC /pin 15)
V-latch DAC VP pulse input pin
• Input threshold voltage: 1.5 V
High input: V11 > 2.1 V
5 V
40 µA
40 µA
Low input: V11 > 0.9 V
0 V
11
1.5 V
• The data for color, tint, brightness and con-
trast are rewritten at the timing of high-to-
low-going VP pulse in DAC SW13-6 (V-latch
mode). In the through mode, the data are re-
written at the timing of the data sent, regard-
less of VP pulse.
200 Ω
5 kΩ
40 kΩ
500 Ω
• This pin does not affect a blanking operation.
• Recommended use range: 0 V to 5 V
12
13
14
15
Slave address SW:
VCC 5 V (I2L VCC /pin 15)
Slave address changeover pin for this IC
• V12 = 5 V: Slave address 86
DC
V12 = 0 V: Slave address 84
0 V to 5 V
41 kΩ
20 kΩ
Set a slave address carefully so as not to over-
lap with the other ICs in the same set.
• Recommended use range: 0 V to 5 V
12
SDA:
VCC 5 V (I2L VCC /pin 15)
I2C bus data input pin
• Input threshold voltage: 2 V
• Recommended use range: 0 V to 5 V
20 µA
50 µA
3.25 V
2.75 V
Data
1 kΩ
13
200 Ω
SCL:
I2C clock input pin
V
CC 5 V (I2L VCC /pin 15)
20 µA
50 µA
2.75 V
3.25 V
• Input threshold voltage: 2 V
• Recommended use range: 0 V to 5 V
Data
14
1 kΩ
200 Ω
VCC 5 V:
Pins 15, 22
Power supply pin for I2L and pulse-system
• Pin 15: I2L power supply pin
(pair with pin 1 GND)
5 V
Circuit
47 µF
0.01 µF
• Pin 22: Pulse-system power supply pin
(pair with pin 16 GND)
• Apply 5 V for use.
• Recommended use range: 4.5 V to 5.5 V
14
PANASONIC [ PANASONIC ]
