OXCFU950 OVERVIEW
OXFORD SEMICONDUCTOR, INC.
Symbol
Description
Values
t
Pad type
I—input pad
O—output pad
T—Tri-state output pad
B—Bidirectional pad
A—Analogue pad
P—Power pad
C—cmos
a
Logic type
T—TTL
xy
Operating voltage
33—3V3
18—1V8
00—0 V (i.e. VSS Ground)
h
i
Tolerant input voltage level
Input type
5—5 V
N—same as operating voltage
N—normal
S—Schmitt
d
Output drive strength
1—x1 drive strength
2—x2 drive strength
3—x3 drive strength
U—pull up resistor
D—pull down resistor
p
Pull up/down resistor
Table 3: Pad Type Syntax Symbol Descriptions
Note 2 : PC Card/CompactFlash Power Domain Group
•
•
•
This group of signals is in the PC Card/CompactFlash power domain group.
Supply voltage range is specified from 2.85 V to 3.6 V.
This is also the internally connected supply to the internal regulator. Hence pin #28 should be connected to the PC
Card/CompactFlash supply source.
Note 3 : Modem Power Domain Group
•
•
This group of I/O signals is in the MODEM power domain group.
Supply voltage range is specified from 1.8 V to 3.6 V.
Note 4 : Analogue Power Domain Group
This group of I/O signals is in the analogue power domain group (which supplies the oscillator and PLL).
•
Note 5 : USB Power Domain Group
•
•
This group signals is in the USB power domain group.
Supply voltage range is specified from 2.85 V to 3.6 V.
OV-0004 May 06
External—Free Release
Page 7 of 11