Version 1.3
SFH 213 FA
TTW Soldering
IEC-61760-1 TTW
OHA04645
300
˚C
10 s max., max. contact time 5 s per wave
T
Continuous line: typical process
Dotted line: process limits
250
235 ˚C - 260 ˚C
First wave
Second wave
∆T < 150 K
200
150
100
50
Cooling
Preheating
ca. 3.5 K/s typical
ca. 2 K/s
130 ˚C
120 ˚C
100 ˚C
ca. 5 K/s
Typical
0
0
20
40
60
80
100
120
140
160
180
200
220 s 240
t
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of
OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be
expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that
device or system.
**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or
maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be
endangered.
2015-12-23
7
OSRAM [ OSRAM GMBH ]
