页页次: 7/13
结到外壳的热阻从IC的结到正下方的管芯的情况下的底指定。该
焊线附加路径。前者是最低电阻的路径。需要正确安装,以确保
最佳的热式流量封装到散热片的这个区域。在外壳到散热器的界面热复合
强烈推荐。在这一系列的所有设备的情况下电连接到所述输出。因此,如果情况
的设备必须是电绝缘的,导热垫片可以用,只要它的热阻
考虑。
保护二极管
In general operation, RS1117A series don’t need any protection diodes. From the cross‐section structure of RS1117A series,
的输出端连接到P +衬底,并在输入管脚连接到n-阱。有一个寄生二极管的反向
在它们之间。它可以处理5A的微秒浪涌电流至10A 。甚至具有大输出电容,这是很
difficult to get those values of surge currents in normal operation. Only with high value output capacitors, such as 1000uF.
And with the input pin instantaneously shorted to ground, can damage occur. A crowbar circuit at the input of the RS1117A
系列可以产生这些类型的电流,并从输出到输入的二极管被推荐。正常供电
循环或甚至插拔系统中不会产生电流大到足以做任何损害。
电压
RS1117ASJ-A
RS1117ASJ-B
RS1117ASJ-C
RS1117ASJ-D
RS1117ASJ-E
RS1117A -A
RS1117A -B
RS1117A -C
RS1117A -D
RS1117A -E
输出电压
ADJ
1.8V
2.5V
3.3V
5.0V
ADJ
1.8V
2.5V
3.3V
5.0V
SOT-223
包
输出电压
RS1117AJ-A
RS1117AJ-B
RS1117AJ-C
RS1117AJ-D
RS1117AJ-E
RS1117AE-A
RS1117AE-B
RS1117AE-C
RS1117AE-D
RS1117AE-E
输出电压
ADJ
1.8V
2.5V
3.3V
5.0V
ADJ
1.8V
2.5V
3.3V
5.0V
TO-252
包
DS‐RS1117A‐16
September, 2009
www.Orister.com