Page No. : 2/10
This integrated circuit can be damaged by ESD. Orister Corporation recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Pin Assignment
SOT‐25
PACKAGE
PIN
1
2
3
4
5
SYMBOL
VIN
GND
EN
NC
VOUT
DESCRIPTION
Regulator Input Pin
Ground Pin
Chip Enable Pin
No Connection
Regulator Output Pin
SOT‐25
Ordering Information
DEVICE
DEVICE CODE
XX is nominal output voltage (for example, 15 = 1.5V, 33 = 3.3V, 285 = 2.85V).
YY is package designator :
NE: SOT‐25
Z is Lead Free designator :
P: Commercial Standard, Lead (Pb) Free and Phosphorous (P) Free Package
G: Green (Halogen Free with Commercial Standard)
RS7103‐XX YY Z
Block Diagram
DS‐RS7103‐02
September, 2009
www.Orister.com
ORISTER [ ORISTER CORPORATION ]
