No.
3
Parameter
Criteria
The Shape of Dot
(1) Dot Shape (with Dent)
≧
0.15
As per the sketch of left hand.
(2) Dot Shape (with Projection)
Should not be connected to next dot.
(3) Pin Hole
X
(X+Y) / 2≦0.2mm
Y
(Less than 0.1mm is no counted.)
(4) Deformation
(X+Y) / 2≦0.2mm
Y
X
Total acceptable number : 1/dot, 5/cell
(Defect number of (4) : 1pc.)
4
5
Polarizer Scratches
Polarizer Dirts
Not to be conspicuous defects.
If the stains are removed easily from LCDP surface, the module is not
defective.
6
7
Complex Foreign
Substance Defects
Distance between
Different Foreign
Substance Defects
Black spots, line shaped foreign substances or air bubbles between
glass & polarizer should be 5pcs maximum in total.
D≦0.2 : 20mm or more
0.2<D : 40mm or more
DMF6104NB-FW (AA) No.97-0138
OPTREX CORPORATION
Page 15/17
OPTREX