No.
3
Parameter
Criteria
The Shape of Dot
(1) Dot Shape (with Dent)
≧
0.15
As per the sketch of left hand.
(2) Dot Shape (with Projection)
Should not be connected to next dot.
(3) Pin Hole
X
(X+Y) / 2≦0.2mm
Y
(Less than 0.1mm is no counted.)
Total defects shall not exceed 5.
Not to be conspicuous defects.
4
5
Polarizer Scratches
Polarizer Dirts
If the stains are removed easily from LCDP surface, the module is not
defective.
6
Color Variation
Not to be conspicuous defects.
DMC16249UB* (BK) No.98-0151
OPTREX CORPORATION
Page 12/14
OPTREX
OPTREX [ OPTREX CORPORATION ]
