■ Sensor Heads (Through-beam)
Item
Model
ZX-LT001
Through-beam
ZX-LT005
ZX-LT010
ZX-LT030
Optical system
Light source
(wave length)
Visible-light semiconductor laser with a wavelength of 650 nm
EN class 1, FDA class II
Maximum output
0.2 mW max.
1-mm dia.
0.35 mW max.
1- to 2.5-mm dia. 5 mm
0.2 mW max.
Measurement width
10 mm
30 mm
Measurement
distance
0 to 500 mm
500 to 2,000 mm 0 to 500 mm
Minimum sensing
object
8-µm dia.
(opaque)
8- to 50-µm dia. 0.05-mm dia. (opaque)
(opaque)
0.1-mm dia. (opaque)
0.3-mm dia. (opaque)
Resolution*1
4 µm *2
---
4 µm *3
12 µm *4
Temperature
characteristic
0.2% FS/°C
0.3% FS/°C
Ambient illumination Incandescent lamp: 10,000 l× max. (on light-receiving side)
Ambient temperature Operating: 0 to 50°C, Storage: −25 to 70°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% (with no condensation)
Degree of protection IEC60529, IP40
Connection method
Connector relay (standard cable length: 500 mm)
Weight (packed state) Approx. 220 g
Approx. 450 g
Zinc die-cast
Cable length
Materials Case
Cover
Extendable up to 10 m with special extension cable.
Polyetherimide
Polycarbonate
Front filter Glass
Tightening torque
Accessories
0.3 N⋅m max.
Instruction sheet, Sensor Head-Amplifier Connection Cable
Optical axis adjustment seal
Mounting Bracket
*1. This value is obtained by converting the deviation ( 3σ) in the linear output that results when the sensor head is connected to the amplifier unit,
into the measurement width.
*2. For an average count of 64. The value is 5 µm for an average count of 32.
This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
*3. For an average count of 64. The value is 5 µm for an average count of 32.
*4. For an average count of 64. The value is 15 µm for an average count of 32.
4
ZX Series (ZX-L-N) Smart Sensors (Laser Type)