Ordering Information
Plugs with straight DIP terminals
Plugs right-angle DIP terminals
No. of
contacts
No. of
polarizing
slots
10
0
1
1
1
1
1
1
1
1
1
XG4A-1073
XG4A-1033
XG4A-1433
XG4A-1633
XG4A-2033
XG4A-2633
XG4A-3033
XG4A-3433
XG4A-4033
XG4A-5033
XG4A-1076
XG4A-1036
XG4A-1436
XG4A-1636
XG4A-2036
XG4A-2636
XG4A-3036
XG4A-3436
XG4A-4036
XG4A-5036
XG4A-5076
XG4A-6036
XG4A-6076
XG4A-6436
XG4A-6476
14
16
20
26
30
34
40
50
2 (See note.) XG4A-5073
XG4A-6033
2 (See note.) XG4A-6073
XG4A-6433
2 (See note.) XG4A-6473
60
64
1
1
Note: Polarity slot pitch is 22.86 mm.
■ Lock Levers for XG4A-@@3@/7@
Attachment after Soldering
Ordering Information
• Long Levers interfere with automated mounting.
• Long Levers are in the way when boards are packed.
↓
• These problems are resolved using Connectors with Long Levers
that can be attached after soldering is completed.
XG4Z-0010
Long Lock Lever
XG4Z-0011
Short Lock Lever
Type
Model
Min. order
Long Lock Levers
Short Lock Levers
XG4Z-0010
XG4Z-0011
20
Slim Long Lock Levers XG4Z-0012
Slim Short Lock Levers XG4Z-0013
Note: 1. The left and right Lock Levers are identical. One pair is
needed for each Plug.
2. Use Long Lock Levers when mating XG4A plug to XG4M-T
cable mount socket with strain relief or XG5M sockets for
discrete wires.
3. Use Short Lock Levers when mating XG4A plug to XG4M
• These versions of the XG4A connector allows you to attach Lock
Levers on Right-angle Terminal Plugs after automated soldering is
completed.
without strain relief attached.
• Lock Levers can be easily mounted simply by manually pushing
them in.
• Lock Levers can be used with either Straight or Right Angle
versions of the XG4A.
Flat Cable Connectors XG4
53
OMRON [ OMRON ELECTRONICS LLC ]
