A165K
A165K
Specifications
J APPROVED STANDARDS
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
EN60947-5-1 (Low Voltage Directive)
J RATINGS
AC resistive load
DC resistive load
3 A, 30 VDC
3 A, 250 VAC
5 A, 125 VAC
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the
following conditions according to JIS C4505 and C4520.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20°±2°C
4. Operating frequency: 20 times/min
J CONTACT
Name
SPDT
Contact
J CHARACTERISTICS
Item
Key-type Selector Switch
Allowable operating
frequency
Mechanical
Electrical
20 operations/min max.
10 operations/min max.
100 MΩ min. (at 500 VDC)
Insulation resistance
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity
2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each
terminal and ground
Vibration resistance
Shock resistance
Malfunction
Mechanical
Malfunction
Mechanical
Electrical
10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms)
2
500 m/s (50G)
2
150 m/s (15G) max. (malfunction within 1 ms)
Life expectancy
250,000 operations min. (life of key: 10,000 operations min.)
100,000 operations min.
Ambient temperature
Ambient humidity
Operating: --10°C to 55°C (14°F to 131°F) with no icing or condensation
Storage:
--25°C to 65°C (-13°F to 149°F) with no icing or condensation
Operating: 35% to 85%
Electric shock protection class
Degree of contamination
Weight
Class II
3 (IEC947-5-1)
Approx. 26.5 g (0.93 oz) in the case of a DPDT switch key
Note: Set and reset constitute one operation.
J OPERATING CHARACTERISTICS
Key-type Selector Switch
Type
2 positions
3 positions
Features
Operating force (OF) max.
Set position (SP)
9.8 N S m (1,000 gf S cm)
90±5°
45±10°
37