A165S/W
A165S/W
J PANEL CUTOUTS
Rectangular
A165j-J
Square A165j-A
Round A165j-T
(Top View)
(Top View)
+0.2
16
dia.
+0.2
0
16
dia.
24 min.
(0.94)
0
24 min.
(0.94)
+0.008
0
(0.63
)
+0.008
0
(0.63
)
19 min.
(0.75)
19 min.
(0.75)
Note: 1. Make sure the thickness of the mounting panel is between 0.5 and 3.2 mm. If, however, a Switch Guard or Dust Cover is
used, the thickness of the mounting panel must be between 0.5 and 2 mm.
2. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
J TERMINAL ARRANGEMENT
Without Transformer
Lamp terminals are not provided with the Non-illuminated Knob-type Selector Switches and Key-type Selector Switches.
SPDT Switches
DPDT Switches
Illuminated type
Illuminated type
Terminal Arrangement
(Bottom View)
Terminal Arrangement
(Bottom View)
Dimensions of
Terminal Holes
Dimensions of
Terminal Holes
7.4
(0.29)
7.4
(0.29)
12.2
12.2
(0.48)
(0.48)
Lamp terminal
18
(0.71)
18
(0.71)
Lamp terminal
Note: The L+ is not shown
on the Switch Unit.
Note: The L+ is not shown
on the Switch Unit.
Installation
For details on Panel Mounting, mounting and removing the Switch Unit, refer to installation details for the A16 Pushbutton Switch.
J FLANGE ROTATION (COMMON TO ALL SELECTOR SWITCHES)
A165 Knob-type Selector Switch
Fix the Switch screw and rotate the flange in 45° turns.
Flange
Fixing ring
Switch screw
32