A165S/W
Specifications
Operation Angle
Contact Form
Contact from
SPDT DPDT
Two notches
Three notches
(75°)
FP
No. of
notches
(45°)
45°
(45°)
45°
90°
Posi-
Posi-
tion
FP
SW
SW2 SW1
tion
2 notches
3 notches
Note: The angle used for automatic reset is
shown in parentheses.
---
FP: Free Position
SW2
SW1
Nomenclature
Model structure
Selector
●Flange Shape
●Color of Selector
Rectangular
· LED models
(A165@-J)
Red Yellow Green
· Non-lighted models
Black
Square
(A165@-A)
●Lighting Method
· Lighted (LED) models
(The upper face of the
knob is illuminated.)
· Non-lighted models
Round
(A165@-T)
●Number of Notches and Reset Method
· 2 Notches: Manual reset, Automatic reset
· 3 Notches: Manual reset, Automatic reset
●Protective
Structure
Oil-resistant IP65
Switch
●Switch Specifications
5 A at 125 VAC
5 A at 250 VAC
3 A at 30 VDC
Minimum applicable load:
1 mA at 5 VDC
●Terminal Type
Solder terminals
PCB terminals
The flange can be rotated to easily change the
operation angle of the knob.
For information on rotating the flange, refer to page 14.
Example: Knob-type Selector Switch with Two Notches
FP
(75°)
90°
90°
90°
(Standard condition when shipped)
Note: The angle is 75° for self-resetting models.
9