A165S/W
Specifications
Operation Angle
Two notches
(75°)
90°
FP
(45°)
45°
Contact Form
Three notches
FP
(45°)
45°
Contact from
No. of
SPDT
DPDT
notches Posi-
Posi-
SW
SW2 SW1
tion
tion
2 notches
Note: The angle used for automatic reset is
shown in parentheses.
FP: Free Position
3 notches ---
SW2
SW1
Nomenclature
Model structure
Selector
●Flange
Shape
Rectangular
(A165@-J)
●Color
of Selector
· LED models
Red Yellow Green
· Non-lighted models
Black
●Lighting
Method
· Lighted (LED) models
(The upper face of the
knob is illuminated.)
· Non-lighted models
●Number
of Notches and Reset Method
· 2 Notches: Manual reset, Automatic reset
· 3 Notches: Manual reset, Automatic reset
Square
(A165@-A)
Round
(A165@-T)
●Protective
Structure
Oil-resistant IP65
Switch
●Switch
Specifications
5 A at 125 VAC
5 A at 250 VAC
3 A at 30 VDC
Minimum applicable load:
1 mA at 5 VDC
●Terminal
Type
Solder terminals
PCB terminals
The flange can be rotated to easily change the
operation angle of the knob.
For information on rotating the flange, refer to page 14.
Example: Knob-type Selector Switch with Two Notches
(75°)
90°
90°
FP
90°
(Standard condition when shipped)
Note: The angle is 75° for self-resetting models.
9