A165S/W
Specifications
Approved Standard Ratings
UL, cUL (File No. E41515)
TÜV (EN60947-5-1) (Low Voltage Directive)
CCC (GB14048.5)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Socket Unit.
For detailed information on individual products that
have received certification, consult your supplier.
3 A at 250 VAC
3 A at 30 VDC
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Ratings
Switch Ratings
Contact Form
Name
Rated voltage
125 VAC
Resistive load
Contact form
5 A
3 A
3 A
NC
SPDT
COM
250 VAC
NO
30 VDC
Super-bright LED
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20 2°C
4. Operating frequency: 20 times/min
Rated
voltage
Rated
current
Operating
voltage
Internal limiting
resistor
Red, yellow: 300 Ω
Green: 160 Ω
5 VDC
5 VDC 5%
8 mA
Red, yellow: 1 kΩ
Green: 910 Ω
12 VAC/VDC
24 VAC/VDC
12 VAC/VDC 5%
24 VAC/VDC 5%
2.4 k
Ω
Characteristics
Socket Unit
Screw-less Clamp
Item
Type
Knob-type Selector Switch
Item
Type
Screw-less Clamp
0.5 mm2 twisted wire or 0.8 mm-dia. solid wire
Allowable Mechanical
operating
20 operations/minute max.
Recommended
wire size
Electrical
frequency
10 operations/minute max.
Twisted
wire
0.3 mm2
0.5 mm2 0.75 mm2 1.25 mm2
Insulation resistance
100 MΩ min. (at 500 VDC)
Usable
wires
and
tensile
strength Tensile
strength
Between termi-
nals of same
polarity
Solid
wire
0.5 mm dia. 0.8 mm dia. 1.0 mm dia.
---
1,000 VAC, 50/60 Hz for 1 min
10 N
20 N
10 1 mm
JIS C 2811 Terminal Blocks for Industrial Use
30 N
40 N
Between termi-
nals of different 2,000 VAC, 50/60 Hz for 1 min
Dielectric
strength
Length of exposed
wire
polarity
Between each
terminal and
ground
Compliant
standards
2,000 VAC, 50/60 Hz for 1 min
1,000 VAC, 50/60 Hz for 1 min*
Between lamp
terminals
Operating Characteristics
Vibration
resistance
10 to 55 Hz, 1.5-mm double amplitude
(malfunction within 1 ms)
500 m/s2
150 m/s2 max.
(malfunction within 1 ms)
Malfunction
Destruction
Malfunction
Knob-type Selector Switch
Type
Characteristics
2 notches
3 notches
Shock
resistance
Operating force (OF) max.
Set position (SP)
0.1 N·m
+10
0
90 5°
45°
Mechanical
Electrical
250,000 operations min.
100,000 operations min.
Durability
Electric shock protection
class
Class II
PTI (tracking characteristic) 175
Degree of contamination
3 (IEC60947-5-1)
Approx. 13 g
(in the case of a lighted DPDT switch)
Weight
Ambient operating
temperature
−10°C to 55°C
(with no icing or condensation)
Ambient operating
humidity
35% to 85%RH
Ambient storage
temperature
−25°C to 65°C
(with no icing or condensation)
* With LED not mounted.
(Perform testing with the LED not mounted.)
8