A165S/W
Dimensions
(Unit: mm)
Non-lighted Models with PCB Terminals (Lamp terminals are not provided with the Non-lighted Knob-type Selector
Switches and Key-type Selector Switches.)
Non-lighted SPDT Switches
Non-lighted DPDT Switches
Terminal Arrangement
Terminal Arrangement
(Bottom View)
Side with TOP
indicated
(Bottom View)
Model, rating, and lot
number indication
Dimensions of
PCB Terminals
Dimensions of
PCB Terminals
Side with TOP
indicated
5.3
NC
NO
5.3
NC
NO
NC
NO
3.5
3.5
1.5
1.5
COM
SW1
COM
SW1
COM
SW2
0.8
0.8
12.4
18.6
12.4
18.6
2.7
2.7
PCB Cutouts
(Bottom View)
PCB Cutouts
(Bottom View)
Side with TOP indicated
Side with TOP indicated
A
0.1
A 0.1
20 0.1
12.4 0.05
20 0.1
12.4 0.05
L
0.1
L
0.1
6.3 0.05
6.3 0.05
Three, 1 dia.
6.3 0.05
Two, 5 dia.
Two, 5 dia.
A = 24 min.: Rectangular
A = 21 min.: Square/Round
L = 24 min.
A = 24 min.: Rectangular
A = 21 min.: Square/Round
L = 24 min.
Use t = 1.6 for the PCB.
Use t = 1.6 for the PCB.
Six, 1 dia.
Note: Secure the panel to the board using stud bolts if force will
be applied to the board after wiring.
Note: Secure the panel to the board using stud bolts if force will
be applied to the board after wiring.
For details on mounting the Switch to a panel, and mounting and dismounting the Switch, refer to
installation details for the A16 Pushbutton Switch.
Flange Rotation (All Selector Switches)
A165 Knob-type Selector Switch
Fix the Switch screw and rotate the flange in
A165 Key-type Selector Switch
Fix the Switch screw and rotate the flange in
45° turns.
45° turns.
Flange
Flange
Lock ring
Lock ring
Switch screw
Switch screw
14