A165S/W
Specifications
Approved Standard Ratings
UL, cUL (File No. E41515)
5 A at 125 VAC, 3 A at 250 VAC (general use)
3 A at 30 VDC (resistive)
Note: Certification has been obtained for the Socket Unit.
For detailed information on individual products that
have received certification, consult your supplier.
TÜV (EN60947-5-1) (Low Voltage Directive)
3 A at 250 VAC
3 A at 30 VDC
CCC (GB14048.5)
5 A at 125 VAC
3 A at 250 VAC
3 A at 30 VDC
Ratings
Switch Ratings
Rated voltage
125 VAC
250 VAC
30 VDC
Resistive load
5A
3A
3A
Rated
voltage
5 VDC
12 VAC/VDC
24 VAC/VDC
8 mA
Contact Form
Name
SPDT
Contact form
NC
COM
NO
Minimum applicable load: 1 mA at 5 VDC
Rated values are obtained from tests conducted under the following conditions.
1. Load: Resistive load
2. Mounting conditions: No vibration and no shock
3. Temperature: 20±2°C
4. Operating frequency: 20 times/min
Super-bright LED
Rated
current
Operating
voltage
5 VDC±5%
12 VAC/VDC±5%
24 VAC/VDC±5%
Internal limiting
resistor
Red, yellow: 300
Ω
Green: 160
Ω
Red, yellow: 1 kΩ
Green: 910
Ω
2.4 kΩ
Characteristics
Socket Unit
Item
Type
Knob-type Selector Switch
20 operations/minute max.
10 operations/minute max.
100 MΩ min. (at 500 VDC)
1,000 VAC, 50/60 Hz for 1 min
Allowable Mechanical
operating
frequency Electrical
Insulation resistance
Between termi-
nals of same
polarity
Screw-less Clamp
Item
Type
Screw-less Clamp
0.5 mm
2
twisted wire or 0.8 mm-dia. solid wire
Recommended
wire size
Twisted
wire
Dielectric
strength
Between termi-
nals of different
2,000 VAC, 50/60 Hz for 1 min
polarity
Between each
terminal and
ground
Between lamp
terminals
2,000 VAC, 50/60 Hz for 1 min
1,000 VAC, 50/60 Hz for 1 min*
10 to 55 Hz, 1.5-mm double amplitude
(malfunction within 1 ms)
500 m/s
2
150 m/s
2
max.
(malfunction within 1 ms)
250,000 operations min.
100,000 operations min.
Class II
0.3 mm
2
0.5 mm
2
0.75 mm
2
1.25 mm
2
Usable
wires
Solid
and
0.5 mm dia. 0.8 mm dia. 1.0 mm dia.
---
wire
tensile
strength Tensile
10 N
20 N
30 N
40 N
strength
Length of exposed
wire
Compliant
standards
10
±1
mm
JIS C 2811 Terminal Blocks for Industrial Use
Operating Characteristics
Type
Characteristics
Operating force (OF) max.
Set position (SP)
90±5°
Knob-type Selector Switch
2 notches
0.1 N·m
45°
+10
0
3 notches
Vibration
Malfunction
resistance
Destruction
Shock
resistance Malfunction
Durability
Mechanical
Electrical
Electric shock protection
class
Degree of contamination
Weight
Ambient operating
temperature
Ambient operating
humidity
Ambient storage
temperature
PTI (tracking characteristic)
175
3 (IEC60947-5-1)
Approx. 13 g
(in the case of a lighted DPDT switch)
−10°C
to 55°C
(with no icing or condensation)
35% to 85%RH
−25°C
to 65°C
(with no icing or condensation)
* With LED not mounted.
(Perform testing with the LED not mounted.)
8
OMRON [ OMRON ELECTRONICS LLC ]
