A16
Dimensions
(Unit: mm)
Panel Cutouts
Solder Terminals and Screw-less Clamp Connectors
PCB Terminals
Square A16@-A/M16@-A
Round A16@-T/M16@-T
Square A16@-A/M16@-A
Round A16@-T/M16@-T
Rectangular A16@-@J/M16@-@J
Rectangular A16@-J/M16@-J
(Top View)
(Top View)
(Top View)
(Top View)
24 min.
16+0.2 dia.
24 min.
16+0.2 dia.
0
0
16+0.2 dia.
19 min.
(25 min.)
(25 min.)
16+0.2 dia.
19 min.
0
0
(25 min.)
9.1 0.05
19 min.
(33 min.)
19 min.
(33 min.)
19 min.
(33 min.)
24 min.
14.7 0.05 dia.
5.1 0.05
Note:• Make sure the thickness of the mounting panel is between 0.5 and 3.2
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
Note:• Ensure that the variation in the distance between the centers of
neighboring mounting holes is less than ± 0.1 mm.
• Make sure the thickness of the mounting panel is between 0.5 and 3.2
mm. If, however, a Switch Guard or Dust Cover is used, the thickness
of the mounting panel must be between 0.5 and 2 mm.
• If the panel is to be finished with coating, etc., make sure that the panel
meets the specified dimensions after coating.
• Figures in parentheses are for Screw-less Clamp Connectors.
• If the panel is to be finished with coating, etc., make sure that the panel
meets the specified dimensions after coating.
Terminal Arrangement
Models without Reduced-voltage Lighting (Non-lighted Pushbutton Switches are also provided with lamp terminals.)
Solder Terminals
Lighted SPDT Switches
Terminal Arrangement
(Bottom View)
Lighted DPDT Switches
Terminal Arrangement
(Bottom View)
Dimensions of
Terminal Holes
Dimensions of
Terminal Holes
NC
NC
NO
NC
NO
L-
L-
NO
2.6
0.9
7.4
2.6
0.9
7.4
COM
SW1
COM
SW1
COM
SW2
12.2
18
1.5
2.8
12.2
18
1.5
2.8
Lamp terminal
Lamp terminal
Note: The L+ is not shown on the Switch.
Note: The L+ is not shown on the Switch.
21
OMRON [ OMRON ELECTRONICS LLC ]
