A165K
A165K
Models with PCB Terminals
Rectangular
A165j-J
Square A165j-A
Round A165j-T
Rectangular
A165Kj-2S
(Top View)
(Top
View)
(Top View)
16+0.2dia.
24 min.
16+0.2dia.
25 min.
16+0.2dia.
0
0
0
24 min.
19 min.
24 min.
33 min.
(Dimension A)
Recommended panel thickness: 0.5 to 3.2 mm
Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0.1 mm.
2. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the
thickness of the mounting panel must be 0.5 to 2 mm.
3. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating.
Terminal Arrangement
Models with Solder Terminals without Reduced-voltage Lighting
Lamp terminals are not provided with the Non-lighted Knob-type Selector Switches and Key-type Selector Switches.
Lighted SPDT Switches
Lighted DPDT Switches
T
erminal Arrangement
T
erminal Arrangement
(Bottom View)
(Bottom View)
Dimensions of
Dimensions of
Terminal Holes
Terminal Holes
Lamp terminal
Lamp terminal
Note: The L+ is not shown
Note: The L+ is not shown
on the Switch.
on the Switch.
Non-lighted SPDT Switches
Dimensions of
Non-lighted DPDT Switches
Dimensions of
T
erminal Arrangement
T
erminal Arrangement
(Bottom View)
(Bottom View)
Side with TOP
indicated
Side with TOP
indicated
Terminal Holes
Terminal Holes
105
OMRON [ OMRON ELECTRONICS LLC ]
