61F-AN/-APN2
Connections (Refer to connection diagram.)
•
Connect output terminal Ta in the 61F-G example (page 5) to input
terminal 2 on the 61F-APN2.
•
Connect coil terminal A on each of the two contactors to the
switching contact terminals 3 and 4 on the 61F-APN2.
•
Use the switching contact terminals 5 and 6 on the 61F-APN2 to
control the operation of the two pumps.
•
The power supply of the 61F-APN2 is 100, 110, 200, or 220 VAC.
Be sure to use the correct power supply.
Output contact between
1-3 and 6-8
Output contact between
1-4 and 5-8
Power supply voltage
between 2-7
40 ms min.
200 ms min.
3