欢迎访问ic37.com |
会员登录 免费注册
发布采购

3G5A2-OF211 参数 Datasheet PDF下载

3G5A2-OF211图片预览
型号: 3G5A2-OF211
PDF下载: 下载PDF文件 查看货源
内容描述: 可编程控制器 [Programmable Controllers]
分类和应用: 控制器
文件页数/大小: 182 页 / 1513 K
品牌: OMRON [ OMRON ELECTRONICS LLC ]
 浏览型号3G5A2-OF211的Datasheet PDF文件第43页浏览型号3G5A2-OF211的Datasheet PDF文件第44页浏览型号3G5A2-OF211的Datasheet PDF文件第45页浏览型号3G5A2-OF211的Datasheet PDF文件第46页浏览型号3G5A2-OF211的Datasheet PDF文件第48页浏览型号3G5A2-OF211的Datasheet PDF文件第49页浏览型号3G5A2-OF211的Datasheet PDF文件第50页浏览型号3G5A2-OF211的Datasheet PDF文件第51页  
Rack Components  
Section 2-3  
Rack Number Switch  
Each Expansion I/O and Expansion CPU Rack is assigned a rack number from 1  
through 7. Set the rack number on the rack number switch. Words are allocated  
to Racks in order according to rack numbers, starting from the CPU Rack, which  
is always rack number 0.  
Set the rack number switch using a standard screwdriver. If a number other than  
1
through 7 is assigned, or the same rack number is set to more than one Rack,  
the PC will not operate  
Note Turn OFF the power to the PC before setting the rack number switches.  
Display  
The display on the I/O Interface Unit is identical to that on the I/O Control Unit on  
the CPU Rack. For details on the data displayed in each mode, refer to 2-3-2 I/O  
Control Unit.  
Peripheral Device  
Connector  
The I/O Interface Unit CV500-II201 for Expansion I/O Racks provides a connec-  
tor for connecting a Peripheral Device. One Peripheral Device (CVSS or Pro-  
gramming Console) can be connected per to the CPU or I/O Interface Units for  
each PC, although additional Peripheral Devices can be connected to Slave  
Racks if a SYSMAC BUS/2 System is used. Whether mounted to the CPU or an  
I/O Interface Unit, the operation of the Peripheral Device is the same.  
Note When connecting a Peripheral Device to the CPU or an I/O Interface Unit, set the  
baud rate of the CPU to 50k bps via the CPU DIP switch.  
2-3-4 Power Supply Units  
The Power Supply Unit is available in three models. The CV500-PS221 and  
CVM1-PA208 run on 100 to 120 AC or 200 to 240 VAC, and the CV500-PS21  
runs on 24 VDC. Both Power Supply Units can be used with any CPU Rack, Ex  
V
1
-
pansion CPU Rack, Expansion I/O Rack, or Remote I/O Slave Rack. The table  
below summarizes the output capacity of the two models.  
Model  
CVM1-PA208  
CV500-PS221  
CV500-PS211  
Supply voltage  
Output power  
8 A at 5 VDC  
100 to 120/200 to 240 VAC  
12 A at 5 VDC  
12 A at 5 VDC  
24 VDC  
Note The total power consumed by each Rack must be within the values stated in the  
table above. For example, do not mount Units with a total current consumption  
greater than 12 A to a Rack supplied by a 12-A Power Supply Unit.  
34  
 复制成功!