欢迎访问ic37.com |
会员登录 免费注册
发布采购

3G5A2-OF002 参数 Datasheet PDF下载

3G5A2-OF002图片预览
型号: 3G5A2-OF002
PDF下载: 下载PDF文件 查看货源
内容描述: 可编程控制器 [Programmable Controllers]
分类和应用: 控制器
文件页数/大小: 182 页 / 1513 K
品牌: OMRON [ OMRON ELECTRONICS LLC ]
 浏览型号3G5A2-OF002的Datasheet PDF文件第80页浏览型号3G5A2-OF002的Datasheet PDF文件第81页浏览型号3G5A2-OF002的Datasheet PDF文件第82页浏览型号3G5A2-OF002的Datasheet PDF文件第83页浏览型号3G5A2-OF002的Datasheet PDF文件第85页浏览型号3G5A2-OF002的Datasheet PDF文件第86页浏览型号3G5A2-OF002的Datasheet PDF文件第87页浏览型号3G5A2-OF002的Datasheet PDF文件第88页  
Memory Card Battery  
Section 4-2  
Note The maximum life of the battery is 5 years, regardless of whether power is  
supplied to the CPU. The memory backup duration when power is not supplied  
to the CPU varies with the ambient temperature, and also depends on whether  
the Expansion DM Unit is mounted to the CPU (CV1000 only).  
Details of the minimum lifetime of the battery are provided in Appendix B Specifi  
-
cations.  
4-2 Memory Card Battery  
The RAM Memory Card is provided with a backup memory battery.  
When the Memory Card is mounted to the CPU and the battery life is close to  
expiring, the CPU ALARM indicator will blink, bit A42616 will turn ON, and the  
message “BATT LOW” will appear on the Programming Device. When this oc  
-
curs, replace the battery within one week to avoid loss of data.  
The entire replacement must be completed within one minute to ensure that the  
data will not be lost.  
Caution Do not short circuit, charge, disassemble, or expose the battery to heat. The bat  
-
!
tery fluid is flammable and if mishandled, may cause a fire or explosion. Do not  
incinerate the battery after use.  
Battery Replacement  
Battery case  
Slot  
Caution Steps 4 through 7 of the following procedure must be completed within 1 minute.  
If the new battery is not inserted within one minute, the contents of memory will  
be lost.  
!
1, 2, 3...  
1. If the Memory Card (M/C) indicator is not lit, press the Memory Card power  
supply switch to turn on power to the Memory Card and leave it on for at least  
10 seconds.  
2. Press the Memory Card power supply switch to turn off the Memory Card  
indicator.  
3. Press the Memory Card eject button and remove the Memory Card.  
4. Release the battery case by inserting the tip of a pen (or similar object) in the  
slot on the side of the Memory Card as shown.  
5. Remove the old battery from the case.  
6. Install the new battery as shown, with the positive terminal to the top.  
Battery case  
Battery  
7. Insert the battery case back into the Memory Card. Be sure that the case is  
installed all the way in.  
71  
 复制成功!