System Configuration
Section 2-1
Systems with a Single
Expansion I/O Rack
When only one Expansion I/O Rack is required, a simplified system configura
tion may be used. The CPU Backplane can be connected directly to the Expan
-
-
sion I/O Backplane without the use of the I/O Control and I/O Interface Units.
mination Resistance Units are also not required.
Ter-
All Units except for CPU Bus Units (Temperature Controller Data Link Units,
SYSMAC NET Link Units, SYSMAC LINK Units, SYSMAC BUS/2 Masters,
Ethernet Units, Personal Computer Units, and BASIC Units) can be mounted to
any of the Backplanes for which they listed in the following diagram. CPU Bus
Units can be mounted to any slot on any CPU Backplane except for the
CVM1-BC053 or CVM1-BC103 Backplane, on which CPU Bus Units can be
mounted only to the rightmost 3 and 6 slots, respectively.
CPU: CV500-CPU01-EV1, CV1000-CPU01-EV1,
CV2000-CPU01-EV1, CVM1-CPU01-EV2,
CVM1-CPU11-EV2, or CVM1-CPU21-EV2
CPU Backplane: CV500-BC031/051/101 or
CVM1-BC053/103
Power Supply Unit: CV500-PS221/PS211 or
CVM1-PA208
3, 5, or 10 slots
SYSMAC NET Link Units
SYSMAC LINK Units
BASIC Units
C500 I/O Units
C500 Special I/O Units
SYSMAC BUS Masters
SYSMAC BUS/2 Masters
Personal Computer Units
I/O Connecting Cable
CV500-CNjj3
I/O Backplane
CV500-BI042/062/112 or
CVM1-BI064/114
Power Supply Unit
CV500-PS221/PS211
or CVM1-PA208
4/6/11 slots
C500 I/O Units
C500 Special I/O Units
SYSMAC BUS Masters
18
OMRON [ OMRON ELECTRONICS LLC ]
