3F88L-160/-162
Adjustment Operation
The adjustment operation allows you to change the ON/OFF angles
in real time under normal operating conditions (i.e., while producing
cam outputs) to adjust the ON/OFF angles to match those of the
Encoder.
Communications
The Cam Positioner has a communications port that conforms to
CompoWay/F form B. Using communications allows you to read and
write cam programs or monitor the present angle and speed via
communications through this port.
Note:
CompoWay/F is an integrated protocol used for OMRON
general-purpose serial communications. It uses a uniform
frame format and the factory interface network service (FINS)
command structure widely used by OMRON products, such as
Programmable Controllers, to facilitate communications
between multiple components or between computers and
components.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
6
OMRON [ OMRON ELECTRONICS LLC ]
