3F88L-160/-162
Specifications
General Specifications
Item
Supply voltage
Allowable supply voltage
Power consumption
Inrush current
I/O power supply
Allowable I/O supply voltage
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient operating humidity
Ambient storage temperature
Terminals screw size
Momentary power interruption
detection time
Dimensions
Weight
Structure
Mounting method
Model
85 to 264 VAC
27 VA max.
40 A at 10 ms max.
145 mA at 24 VDC
20.4 to 26.4 VDC
20 MΩ min. between all external AC power supply terminals and the protective ground terminal (at 500 VDC)
*
2,300 VAC at 50/60 Hz for 1 min between all external AC power supply terminals and the protective ground
terminal (leakage current: 10 mA max.)
*
IEC 61000-4-4: 2 kV power line
Conforms to JIS C0911: 10 to 57 Hz with 0.075-mm single amplitude 80 min each in X, Y, and Z directions,
57 to 150 Hz at 9.8-m/s
2
acceleration (sweeps: 8 min
×
10 sweeps = 80 min total)
Conforms to JIS C0912: 147 m/s
2
three times each in X, Y, and Z directions
10% to 90% (with no condensation)
−20
to 75°C
Power supply input: M3.5, control I/O: M3
Does not detect momentary power interruptions lasting less than 15 ms.
110
×
100
×
82.5 mm (W
×
H
×
D)
1 kg max.
Mounted inside panel
Screw mounting (two M4 screws) or DIN Track mounting
3F88L-160
100 to 240 VAC, 50/60 Hz
3F88L-162
Ambient operating temperature
0 to 55°C
Ambient operating atmosphere
No corrosive gases
*
Disconnect the functional ground terminal from the protective ground terminal before performing insulation resistance or dielectric strength tests.
Characteristics
Item
No. of outputs
Output performance
No. of banks
Display
Response speed
Detection cycle
Reproducibility
Memory backup
Control unit
Origin compensation
Backlash compensation
Advance angle compensation
Model
16
8 banks at 360 resolution, 4 banks at 720 resolution
7-segment LED (current bank, speed, current angle)
1,600 r/min at 360 resolution, 800 r/min at 720 resolution
100
µs
max.
0.2°
No. of non-volatile memory (EEPROM) writes: 100,000 times
1/360 at 360 resolution, 1/720 at 720 resolution
1 to 359 at 360 resolution, 1 to 719 at 720 resolution
1 to 179 at 360 resolution, 1 to 359 at 720 resolution
Advance angle compensation Range:1 to 359 at 360 resolution, 1 to 719 at 720 resolution
Speed input range:
1 to 1,600 at 360 resolution, 1 to 800 at 720 resolution
Note:
Only zero will be accepted for the angle advancement input when the speed input is zero.
START, TRIG, BANK 1 to 3, and RESET
Photocoupler input impedance: 4.7 kΩ
RUN, ERROR, and M·DET
Open-collector output, maximum switching capacity, 300 mA at 26.4 VDC
5 r/min max.
3F88L-160
32
3F88L-162
Open-collector output, maximum switching capacity: 300 mA at 26.4 VDC (1.6 A max. per connector)
Control inputs
Control outputs
Speed detection accuracy
2
OMRON [ OMRON ELECTRONICS LLC ]
