ZAP
Dimensions
Panel Cutouts
5.2 dia.
(Unit: mm)
Accessories
Rubber Cap
•
Use the special rubber cap to use the Switch in locations subject to
significant splashing water and oil or scattering dust.
Cannot be used, however, with the (2) ZAP-2.
Color
Blue (-A)
Black (-B)
Green (-G)
Red (-R)
White (-W)
Yellow (-Y)
Model
ZB-A
ZB-B
ZB-G
ZB-R
ZB-W
ZB-Y
15
30.5
±
0.3
dia. hole
Safety Precautions
Refer to
Safety Precautions for All Pushbutton Switches.
Precautions for Correct Use
Insulation
•
After wiring the Switch, ensure an appropriate insulating distance.
Wiring
•
Tighten the terminal screws to a torque of 0.78 to 1.18 N·m.
Mounting
•
Tighten the face nut to a torque of 0.98 to 1.76 N·m.
•
For panel mounting, always use a washer (or a nameplate) and
rubber packing.
Washer
(or nameplate)
Rubber packing
Mounting panel
t = 1.6 to 6 mm
3
OMRON [ OMRON ELECTRONICS LLC ]
