FEDL671000-02
1
Semiconductor
ML671000
GENERAL DESCRIPTION
This version:
Jul. 2001
Previous version: Jul. 2001
OKI’s CMOS 32-Bit Single-Chip Microcontroller with Built-in USB Device Controller
The ML671000 is a high-performance CMOS 32-bit microcontroller combining a RISC based, 32-bit CPU core -
the ARM7TDMI
TM
- with USB device controller, memory and peripherals.
The built-in USB device controller which is based on USB1.1 Full-speed (12 Mbps) makes interface with PCs or
other devices by USB. The ML671000, which provides the 32-bit data processing capability and built-in
peripheral functions performed by UART, serial ports, 16-bit timers, a DMA controller, and a memory controller,
is a single-chip microcontroller idealy suited to PC peripheral equipment and communication terminal control
applications.
FEATURES (1)
RISC 32-bit CPU
(ARM7TDMI)
Executable 32-bit instructions and 16-bit instructions
General registers:
32-bit
×
31 registers
Built-in multiplier
Little-endian format
Internal RAM :
4K bytes
External ROM, RAM, I/O :
26M bytes
External DRAM :
32M bytes
I/O pins: 64 pins (I/O directions are specified at the bit level)
16-bit flexible timer
×
2ch
(auto-reload, compare-output, PWM, capture modes)
16-bit auto-reload timer
×
2ch
12-bit watchdog timer
UART (16550A equivalent)
×
1ch, UART/synchronous serial
×
1ch
USB1.1 compliant, support full-speed (12 Mbps)
Transmission type: control, bulk, isochronous, interrupt
Remote wakeup function
Adaptable to USB bus powered devices
Four endpoint addresses
Endpoint FIFO size
EP0
64 bytes
×
2 (transmit/receive)
EP1
64 bytes
×
1 (transmit-receive)
EP2
64 bytes
×
2 (transmit-receive, 2 levels)
EP3
256 bytes
×
2 (transmit-receive, 2 levels)
×
2ch
Single and Dual addressing modes
Cycle steal and Burst transfers
8- or 16-bit data transfers
Maximum transferring: 65536 times
Addressing area:
64M bytes
CPU
Memory Spaces
I/O Ports
Timers
Serial Ports
USB Device Controller
DMA Controller
ARM7TDMI and the ARM POWERED logo are registered trademarks of ARM Ltd., UK.
The information contained herein can change without notice owing to the product being under development.
1/25