M25P32
Initial delivery state
8
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each byte
contains FFh). The Status Register contains 00h (all Status Register bits are 0).
9
Maximum rating
Stressing the device outside the ratings listed in Table 9 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Refer also to the Numonyx SURE Program and other relevant quality
documents.
Table 9.
Symbol
Absolute maximum ratings
Parameter
Min.
Max.
Unit
TSTG
Storage temperature
–65
150
°C
°C
TLEAD
Lead temperature during soldering
see (1)
VCC
0.6
+
VIO
Input and output voltage (with respect to Ground)
–0.6
V
VCC
VPP
Supply voltage
–0.6
–0.2
4.0
V
V
V
Fast Program/Erase voltage
10.0
VESD
Electrostatic Discharge Voltage (Human Body model) (2) –2000
2000
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the Numonyx
ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous Substances
(RoHS) 2002/95/EU.
2. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω).
39/53