Instructions
M25P32
Figure 19. Release from Deep Power-down and Read Electronic Signature (RES)
instruction sequence and data-out sequence
S
0
1
2
3
4
5
6
7
8
9
10
28 29 30 31 32 33 34 35 36 37 38
C
tRES2
Instruction
3 Dummy Bytes
23 22 21
MSB
3
2
1
0
D
Q
Electronic Signature Out
High Impedance
7
6
5
4
3
2
0
1
MSB
Deep Power-down Mode
Stand-by Mode
AI04047C
1. The value of the 8-bit Electronic Signature, for the M25P32, is 15h.
Figure 20. Release from Deep Power-down (RES) instruction sequence
S
tRES1
0
1
2
3
4
5
6
7
C
D
Instruction
High Impedance
Q
Deep Power-down Mode
Stand-by Mode
AI04078B
Driving Chip Select (S) High after the 8-bit instruction byte has been received by the device, but before
the whole of the 8-bit Electronic Signature has been transmitted for the first time (as shown in Figure 20),
still ensures that the device is put into Standby Power mode. If the device was not previously in the Deep
Power-down mode, the transition to the Standby Power mode is immediate. If the device was previously
in the Deep Power-down mode, though, the transition to the Standby Power mode is delayed by t
,
RES1
and Chip Select (S) must remain High for at least t
(max), as specified in Table 13. Once in the
RES1
Standby Power mode, the device waits to be selected, so that it can receive, decode and execute
instructions.
36/53
NUMONYX [ NUMONYX B.V ]
