August 1999
LPV321 Single/ LPV358 Dual/ LPV324 Quad
General Purpose, Low Voltage, Low Power, Rail-to-Rail
Output Operational Amplifiers
General Description
Features
(For V+ 5V and V
=
0V, Typical Unless Otherwise Noted)
−
=
The LPV321/358/324 are low power (9µA per channel at
5.0V) versions of the LMV321/358/324 op amps. This is an-
other addition to the LMV321/358/324 family of commodity
op amps.
j
j
j
Guaranteed 2.7V and 5V Performance
No Crossover Distortion
Space Saving Package
SC70-5
The LPV321/358/324 are the most cost effective solutions
for the applications where low voltage, low power operation,
space saving and low price are needed. The
LPV321/358/324 have rail-to-rail output swing capability and
the input common-mode voltage range includes ground.
They all exhibit excellent speed-power ratio, achieving
152 KHz of bandwidth with a supply current of only 9µA.
2.0x2.1x1.0mm
−40˚C to +85˚C
152KHz
j
j
j
Industrial Temp.Range
Gain-Bandwidth Product
Low Supply Current
LPV321
9µA
15µA
28µA
The LPV321 is available in space saving SC70-5, which is
approximately half the size of SOT23-5. The small package
saves space on pc boards, and enables the design of small
portable electronic devices. It also allows the designer to
place the device closer to the signal source to reduce noise
pickup and increase signal integrity.
LPV358
LPV324
j
j
Rail-to-Rail Output Swing
100kΩ Load
V+−3.5mV
V−+90mV
−0.2V to V+ −0.8V
@
The chips are built with National’s advanced submicron
silicon-gate BiCMOS process. The LPV321/358/324 have bi-
polar input and output stages for improved noise perfor-
mance and higher output current drive.
VCM
Applications
n Active Filters
n General Purpose Low Voltage Applications
n General Purpose Portable Devices
Connection Diagrams
14-Pin SO/TSSOP
5-Pin
SC70-5/SOT23-5
DS100920-3
DS100920-1
Top View
Top View
8-Pin SO/MSOP
DS100920-2
Top View
© 1999 National Semiconductor Corporation
DS100920
www.national.com
NSC [ National Semiconductor ]
