MNLMC6482AM-X REV 0A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (V+ - V-)
16V
Differential Input Voltage
+Supply Voltage
Voltage at Input/Output Pin
(V+)+0.3V,(V-)-0.3V
Current at Input Pin
(Note 6)
+5mA
Current at Output Pin
(Note 3, 5)
+30mA
Current at Power Supply Pin
40mA
Maximum Junction Temperature
(Note 4)
150 C
Power Dissipation
(Note 2)
160mW
Storage Temperature Range
-65 C to +150 C
Operating Temperature Range
-55 C < TA < +125 C
Thermal Resistance
ThetaJA
8-Pin CERAMIC DIP (Still Air)
(500LF/Min Air flow)
ThetaJC
8-Pin CERAMIC DIP
Lead Temperature
(Soldering, 10 seconds)
ESD Tolerance
(Note 7)
117 C/W
62.0 C/W
16.0 C/W
260 C
1.5kV
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Operating Ratings indicate conditions for which the device is functional, but do not
guarantee specific performance limits. For guaranteed specifications and test
conditions, see the Electrical Characteristics. The guaranteed specifications apply
only for the test conditions listed. Some performance characteristics may degrade
when the device is not operated under the listed test conditions.
The maximum power dissipation must be derated at elevated temperatures and is
dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to
ambient thermal resistance), and TA (ambient temperature). The maximum allowable
power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number
given in the Absolute Maximum Ratings, whichever is lower.
Applies to both single-supply and split-supply operation. Continous short circuit
operation at elevated ambient temperature can result in exceeding the maximum allowed
junction temperature of 150 C. Output currents in excess of +30mA over long term may
adversely affect reliability.
All numbers apply for packages soldered directly into a PC board.
Do not short circuit output to V+, when V+ is greater than 13V or reliability will be
adversely affected.
Limiting input pin current is only necessary for input voltages that exceed absolute
maximum input voltage ratings.
Human body model, 1.5k Ohms in series with 100pF. All pins rated per method 3015.6 of
MIL-STD-883. This is a Class 1 device rating.
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
3
NSC [ NATIONAL SEMICONDUCTOR ]
