AC Electrical Characteristics
+
−
=
=
=
=
=
1.35V and RL
O
>
Unless otherwise specified, all limits guaranteed for TJ 25˚C, V
2.7V, V
0V, VCM 1.0V, V
1 MΩ. Boldface limits apply at the temperature extremes.
Symbol
Parameter
Conditions
Typ
Units
(Note 5)
1.5
SR
Slew Rate
(Note 9)
V/µs
MHz
˚
+
=
GBW
Gain Bandwidth Product
Phase Margin
V
15V
1.4
θ
48
m
G m
Gain Margin
17
dB
Amp-to-Amp Isolation
Input-Referred Voltage Noise
(Note 10)
130
27
dB
=
e n
f
1 kHz
=
V
f
1V
CM
=
i n
Input Referred Current Noise
Total Harmonic Distortion
1 kHz
0.2
=
=
10 kHz, AV −10
THD
f
=
=
=
%
R
V
2 kΩ, VO 8 VPP
0.01
L
+
10V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2: Human body model, 1.5 kΩ in series with 100 pF.
Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150˚C. Output currents in excess of 30 mA over long term may adversely affect reliabilty.
=
(T
J(max)
Note 4: The maximum power dissipation is a function of T
, θ , and T . The maximum allowable power dissipation at any ambient temperature is P
J(max) JA
A
D
−T )/θ . All numbers apply for packages soldered directly onto a PC board with no air flow.
A
JA
Note 5: Typical Values represent the most likely parametric norm or one sigma value.
Note 6: All limits are guaranteed by testing or statistical analysis.
+
=
=
Note 7:
V
15V, V
7.5V and R connected to 7.5V. For Sourcing tests, 7.5V ≤ V ≤ 11.5V. For Sinking tests, 3.5V ≤ V ≤ 7.5V.
CM
L
+
O
O
+
Note 8: Do not short circuit output to V when V is greater than 13V or reliability will be adversely affected.
+
=
Note 9: V
15V. Connected as voltage follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
+
=
=
=
12 V
O
Note 10: Input referred, V
15V and R
100 kΩ connected to 7.5V. Each amp excited in turn with 1 kHz to produce V
.
PP
L
Note 11: Guaranteed by design.
5
www.national.com
NSC [ National Semiconductor ]
