LMC6035/LMC6036
AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for T
J
= 25˚C, V
+
= 2.7V, V
−
= 0V, V
CM
= 1.0V, V
1 MΩ.
Boldface
limits apply at the temperature extremes.
Symbol
SR
GBW
θ
m
G
m
e
n
Slew Rate
Gain Bandwidth Product
Phase Margin
Gain Margin
Amp-to-Amp Isolation
Input-Referred Voltage Noise
(Note 10)
f = 1 kHz
V
CM
= 1V
f = 1 kHz
f = 10 kHz, A
V
= −10
R
L
= 2 kΩ, V
O
= 8 V
PP
V
+
O
= 1.35V and R
L
>
Units
V/µs
MHz
˚
dB
dB
Parameter
Conditions
(Note 9)
V
+
= 15V
Typ
(Note 5)
1.5
1.4
48
17
130
27
i
n
THD
Input Referred Current Noise
Total Harmonic Distortion
0.2
0.01
%
= 10V
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2:
Human body model, 1.5 kΩ in series with 100 pF.
Note 3:
Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150˚C. Output currents in excess of 30 mA over long term may adversely affect reliabilty.
Note 4:
The maximum power dissipation is a function of T
J(max)
,
θ
JA
, and T
A
. The maximum allowable power dissipation at any ambient temperature is P
D
= (T
J(max)
−T
A
)/θ
JA
. All numbers apply for packages soldered directly onto a PC board with no air flow.
Note 5:
Typical Values represent the most likely parametric norm or one sigma value.
Note 6:
All limits are guaranteed by testing or statistical analysis.
Note 7:
V
+
= 15V, V
CM
= 7.5V and R
L
connected to 7.5V. For Sourcing tests, 7.5V
≤
V
O
≤
11.5V. For Sinking tests, 3.5V
≤
V
O
≤
7.5V.
Note 8:
Do not short circuit output to V
+
when V
+
is greater than 13V or reliability will be adversely affected.
Note 9:
V
+
= 15V. Connected as voltage follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
Note 10:
Input referred, V
+
= 15V and R
L
= 100 kΩ connected to 7.5V. Each amp excited in turn with 1 kHz to produce V
O
= 12 V
PP
.
Note 11:
Guaranteed by design.
5
www.national.com
NSC [ NATIONAL SEMICONDUCTOR ]
