LM833
Typical Performance Characteristics
Inverting Amp
(Continued)
00521826
Application Hints
The LM833 is a high speed op amp with excellent phase
margin and stability. Capacitive loads up to 50 pF will cause
little change in the phase characteristics of the amplifiers
and are therefore allowable.
Capacitive loads greater than 50 pF must be isolated from
the output. The most straightforward way to do this is to put
a resistor in series with the output. This resistor will also
prevent excess power dissipation if the output is accidentally
shorted.
Noise Measurement Circuit
00521827
Complete shielding is required to prevent induced pick up from external sources. Always check with oscilloscope for power line noise.
Total Gain: 115 dB
@
f = 1 kHz
Input Referred Noise Voltage: e
n
= V0/560,000 (V)
www.national.com
8