ADC0801/ADC0802/ADC0803/ADC0804/ADC0805 8-Bit µP Compatible A/D Converters
November 1999
ADC0801/ADC0802/ADC0803/ADC0804/ADC0805
8-Bit µP Compatible A/D Converters
General Description
The ADC0801, ADC0802, ADC0803, ADC0804 and
ADC0805 are CMOS 8-bit successive approximation A/D
converters that use a differential potentiometric
ladder — similar to the 256R products. These converters are
designed to allow operation with the NSC800 and INS8080A
derivative control bus with TRI-STATE output latches directly
driving the data bus. These A/Ds appear like memory loca-
tions or I/O ports to the microprocessor and no interfacing
logic is needed.
Differential analog voltage inputs allow increasing the
common-mode rejection and offsetting the analog zero input
voltage value. In addition, the voltage reference input can be
adjusted to allow encoding any smaller analog voltage span
to the full 8 bits of resolution.
n
Differential analog voltage inputs
n
Logic inputs and outputs meet both MOS and TTL
voltage level specifications
n
Works with 2.5V (LM336) voltage reference
n
On-chip clock generator
n
0V to 5V analog input voltage range with single 5V
supply
n
No zero adjust required
n
0.3" standard width 20-pin DIP package
n
20-pin molded chip carrier or small outline package
n
Operates ratiometrically or with 5 V
DC
, 2.5 V
DC
, or
analog span adjusted voltage reference
Key Specifications
n
Resolution
n
Total error
n
Conversion time
8 bits
±
⁄ LSB,
±
⁄ LSB and
±
1 LSB
100 µs
14
12
Features
n
Compatible with 8080 µP derivatives — no interfacing
logic needed - access time - 135 ns
n
Easy interface to all microprocessors, or operates “stand
alone”
Connection Diagram
ADC080X
Dual-In-Line and Small Outline (SO) Packages
DS005671-30
See Ordering Information
Ordering Information
TEMP RANGE
ERROR
0˚C TO 70˚C
ADC0802LCWM
ADC0804LCWM
M20B — Small
Outline
ADC0804LCN
0˚C TO 70˚C
−40˚C TO +85˚C
ADC0801LCN
ADC0802LCN
ADC0803LCN
ADC0805LCN/ADC0804LCJ
N20A — Molded DIP
±
1
⁄
4
Bit Adjusted
±
1
⁄
2
Bit Unadjusted
±
1
⁄
2
Bit Adjusted
±
1Bit Unadjusted
PACKAGE OUTLINE
Z-80
®
is a registered trademark of Zilog Corp.
© 2001 National Semiconductor Corporation
DS005671
www.national.com